12 Proven Solutions To Fix iPhone Screen Is Flickering

Learn 12 Proven And Effective Solutions To Fix Flickering/Glitching/Shaking/Flashing Issues On iPhone!

Overview: Is your iPhone screen is flickering? And due to this, you are facing problems in running your phone. If Yes, and you want to get rid of this problem then you have landed on the correct web page. I am here to help you to fix iPhone screen flickering problem. So, keep reading this guide until your solve this issue on your iPhone.

By using iOS System Repair tool, one can:

• Easily fix iPhone screen flickering, glitching, unresponsive screen.
• Also fix other issues and errors on iPhone such as iTunes error, stuck at black/white/red screen, Apple logo, etc.
• Fix the issues in just a few clicks.
• Support all iPhone models and iOS versions.
• 100% safe, easy and user-friendly program.

Free Download Trial Version/Buy Now iOS Repair Tool To Fix iPhone Screen Flickering/Glicthing/Flashing

Why Is My iPhone Screen Flickering?

Many users keep asking why their iPhone screen is flickering, but they not find any suitable answer. So, here I will tell you the exact reasons behind this error.

• If your iPhone have not memory issue like not having enough storage, having low memory, your phone may have problem of performance such as unresponsive display, screen flickering on and off, sluggish performance, apps lagging, random crashes, etc.
• It can also cause by hardware-related issue from a damage component in the display circuit board. If you dropped your phone on floor then on that time you will not see any problem but later it creates problem.
• When there are some issues with your iPhone software. Software update may cause your iPhone 13/12/11/X/8/7/6/5/4/3/SE/XR/XS to screen flickering/glitching issues.
• If your iPhone was water damage then there is a high chance that your iPhone’s component like display circuit board was damaged and causing this error.
• If the apps you have installed on your iPhone is outdated. Or if they have bugs on it.

Now, you are familiar with the reasons and it is time to move to the solutions to fix iPhone screen flickering/flashing issue.

Additional Reading: [Fixed] iPhone Black Screen Of Death Error

Solution 1: Turn Your iPhone Brightness Down

The easy way to fix screen flickering on iPhone is to turn down the brightness.

Below, follow the steps to do the same.

Step 1: Open Settings app on your iPhone and then tap on Display & Brightness.

Step 2: Now, turn down the iPhone’s brightness and then turn off Auto brightness.

Step 3: Keep this for about 10 minutes to set its brightness back to its original condition.

Doing this will stop your iPhone screen from flickering.

Solution 2: Turn On Reduce Transparency

You can turn on reduce transparency to temporarily fix the iPhone screen from flickering. This will also fix the unresponsive iPhone screen.

Below follow the steps to enable Reduce Transparency feature.

Step 1: On your iPhone, open the Settings app and then hit on General.

Step 2: Then scroll down to Accessibility tab and tap on it.

Step 3: After this, hit on Increase contrast.

Step 4: Now, toggle on Reduce Transparency.

Additional Reading: How To Backup iPhone With Broken Screen & Without Passcode

Solution 3: Check Storage Space On Your iPhone

If your iPhone storage is low to carry out other functions then your iPhone may begin misbehaving like screen flickering, frozen screen, screen blinking on and off, etc.

So, you need to check the storage space on your iPhone. And if it is low then delete unwanted data, apps, etc. from the device.

To see the storage space on your iPhone, go to Settings > General > Storage and iCloud Usage.

 

Solution 4: Hard Reset Your iPhone (Force Restart)

You can hard reset or force restart your iPhone to fix iPhone screen glitching problem. Force restarting the device force it to turn off and back on which fix the software crashes due to which your iPhone screen is flickering.

Below learn how to hard reset iPhone.

For iPhone 8 And Latest Model: Press and leave the Volume Up key and then press and leave Volume Down key. After this, press and hold Side key till you see the Apple logo on the iPhone screen.

For iPhone 7 And 7 Plus: Press and hold both Power and Volume Down keys unless the Apple logo pop-up on the screen.

For iPhone SE, 6s, And Earlier Models: Press and hold both Power + Home keys unless the Apple logo is displayed on the screen.

Additional Reading: How To Fix iPhone Stuck On White Screen Of Death (WSOD)

Solution 5: Close The App Or Uninstall & Reinstall Specific App

If your iPhone screen flicker when you open a particular app then there is a problem with that app itself, not with your iPhone.

So, to fix this, you should first close the app. To close it, you need to open the app switcher.

For opening the app switcher on iPhone X and latest model, swipe up from the bottom to the center of your iPhone screen.

And For iPhone 8 and older models, you need to double press the Home button.

Once you open the app switcher, close the specific app by swiping it up and off the top of the screen.

Now, check your iPhone screen is flickering or not. If it is still flickering then you need to uninstall the app and reinstall it again from App Store.

Solution 6: Update The Particular App

If closing and uninstalling and reinstalling the app didn’t fix the issue then you should update certain apps.

To update the app on iPhone, you need to open App Store app on your device. Then enter the name of the specific app in the search box. Next, hit on Update button to install the latest update of that app.

Additional Reading: How To Fix iPhone Apps Not Responding [10 Solutions]

Solution 7: Reset Your iPhone Settings

If you have changed some settings on your iPhone but don’t remember what it was? And after this your iPhone starts to flicker then to troubleshoot it, you need to reset your iPhone settings.

Note: You can make note of important settings like your saved Wi-Fi password, VPN settings, Bluetooth paring, etc.

Now, follow the below steps to reset your iPhone settings.

Step 1: Navigate to Settings > General > Reset.

Step 2: Select Reset All Settings.

Step 3: Now, enter your passcode to confirm the process.

Solution 8: Factory Reset Your iPhone

You can also fix the display flickering problem on iPhone by doing a factory reset. But remember that this will erase all data and settings of your iPhone so before you follow the steps make sure to backup your device data.

Once you have created a backup, follow the below steps to factory reset your iPhone.

Step 1: Head to Settings > General > Reset.

Step 2: Select Erase All Content & Settings.

Step 3: Now, enter your Apple ID and password to confirm.

Once the reset process gets completed, set up your iPhone and check the issue is solved or not.

Additional Reading: [Solved] Erase All Content And Settings Not Working On iPhone/iPad

Solution 9: Boot Your iPhone In Recovery Mode

You can also boot your iPhone into recovery mode to fix the issue. It is similar to factory reset and you will also lose data of your iPhone.

Hence, before you proceed to the steps, back up your iPhone.

Now, follow the below steps to enter recovery mode on an iPhone.

Note: When you start the steps, don’t disconnect your device in midway.

Step 1: Open iTunes on your computer.

Step 2: Then, with the help of USB cable connect your iPhone to your computer.

Note: You should close all the running apps and other work because they can interrupt the recovery process.

Step 3: Now, follow the below key combination to boot your iPhone into recovery mode.

For iPhone 8 And Newer Models: Press and hold Volume Up key and then press and hold Volume Down key. Then press and hold down the Side button until the recovery mode screen pop-up.

For iPhone 7 And 7 Plus: Press and hold both Volume + Side keys until you see the recovery mode display.

For iPhone 6S And Older Models: Press and hold both Power and Home keys till the recovery screen appears.

Step 4: Now, find your iPhone on iTunes.

Step 5: Then click on Restore.

Your iPhone will automatically exit recovery mode, if the newer package has been installed in 15 minutes.

Solution 10: Boot Your iPhone In DFU Mode

Enter your iPhone to DFU (Device Firmware Update) mode. This will fix stubborn software issues. This method also erases your iPhone, so make sure to back up your iPhone.

Note: Don’t follow this solution if you have jailbroken your iPhone, because it will brick your device.

Below, follow the steps to boot your iPhone in DFU mode.

Step 1: Run iTunes on your PC.

Step 2: Then using USB cable connect your iPhone to your PC.

Step 3: Close all the running programs. And then follow the below key combination to boot your iPhone in DFU mode.

For iPhone 8, 8 Plus, SE (2^nd Generation) & Newer Models: Press Volume Up key and let it go. Repeat same with Volume Down key. Now, continue holding the Side and Volume Down buttons unless your iPhone screen goes black. Now release Side button but continue holding the Volume Down key unless your iPhone is shown on iTunes.

For iPhone 7 And 7 Plus: Press and hold both Side and Volume Down keys for a few seconds. After this, leave Side button but keep holding Volume Down key until your iPhone shows iTunes.

For iPhone 6, 6S, Se (1^st Generation) And Older Models: Press and hold Lock and Home buttons simultaneously. After a few seconds leave the Lock key by continue holding the Home button unless you see iTunes on your iPhone.

Step 4: Click on Restore.

Additional Reading: How Do I Get My iPad Out of DFU Mode?

Solution 11: Try iOS Repair To Fix iPhone Screen Flickering Issue

If you have followed all the above solutions but still the issue is not fixed then you can try iPhone Repair tool to fix iPhone screen flickering/flashing/blinking/glitching problems. This software solves the issue that is occurring due to some problem in your iPhone’s OS.

Besides fixing iPhone screen flickering issue, you can also solve other problems such as iTunes error, stuck in recover mode/DFU mode, black/white screen of death, etc.

Compatible will all iPhone iOS versions and iPhone models including iPhone 13/12/11/X/9/XR/XS/8/7/6.

Below, follow the complete steps to fix iPhone screen flickering issue by using iPhone System Repair tool.

Step To Fix Screen Flickering Problem On iPhone

Note: Fixing/Repairing iOS to normal by using iOS System Repair, your iOS device will get updated to latest iOS version. If your device is jailbroken, then it will get updated to non-jailbroken version. And if you have unlocked your device then it will get re-locked.

Step 1: Connect Your iOS Device To Computer

Download, install and launch iOS System Repair on your computer and click on “Repair” from the available option.

Now connect your iPhone, iPad or iPod Touch to your computer with the help of USB cable that came along with the device. As iOS System detects your iOS device click on “Start” to begin the process.

The tool will then show the details information of your device such as device model, iOS version, baseband version, jailbroken or not, etc. Click “Next” to continue.

Step 2: Boot Your iPhone, iPad or iPod Touch In DFU Mode

If your iOS device is not functioning properly, then iOS System Repair Tool will prompt you to boot your iOS device in DFU Mode. Simply follow the steps mentioned-below to boot your iPhone, iPad or iPd Touch into DFU mode.

Step To Boot iPhone X/8/8 Plus/7/7 Plus In DFU Mode:

• Switch OFF your iPhone.
• Press and hold the “Volume Down + Power” button together for 10 seconds.
• Release the “Power” button but keep pressing the “Volume Down” button until your device get into DFU mode.

Steps To Boot Other iOS Devices Into DFU Mode

• Switch OFF your iOS device.
• Press and hold the “Power + Home” button together for 10 seconds.
• Release the “Power” button but keep pressing the “Home” button until your device get into DFU mode.

Step 3: Select And Download The Firmware

To get a guaranteed and successful system recovery, you must select the right device model and firmware information. After that, click on “Download” button.

Since the firmware download is large, you have to wait for some time to complete the download. During the process make sure your network is stable. If your firmware download fails or if it is not downloaded successfully, then you can also click on “Copy” to download the firmware from the Apple official site and click on “Select” to restore the downloaded firmware.

Step 4: Fix iOS Back To Normal Condition

As the firmware download gets completed, click on “Fix Now” button to begin the process of repairing the iOS system issues and bring back your iOS device to work normally again.

Once the repairing process gets complete, your iPhone, iPad or iPod Touch will restart as normal. If it does not boot normally, then try the process again by clicking on the “Try Again” button.

You Might Also Like:

• [iOS] How To Fix Ghost Touch Problem On iPhone/iPad
• Fixed: iPhone Fingerprint (Touch ID) Not Working After iOS Update
• [Fixed]: iPhone XS (Max), XR, X Stuck In Recovery Mode
• [8 Ways] How To Fix Vertical Lines On iPhone

Solution 12: Check Hardware Damage

If still the error is not solved then it means that your iPhone has hardware damage. If your iPhone is under warranty period then replace your iPhone. But if the warranty is over then you can follow the below tips:

• Check that your iPhone screen is clean because dust particles on the screen may cause an unresponsive touch screen, or screen to flicker.
• Replace the LCD screen.
• Or you can give your device to Apple Service Center.

Wrap Up

Well, this guide has shown you 12 proven solutions to fix iPhone screen is flickering/flashing/glitching issues. I hope this error will be fixed once you applied the above solutions.

If there is a problem with your iPhone iOS then you are recommended to try iPhone System Repair tool to fix the screen flickering/shaking/glitching issue on iPhone.